Alumni

Claude Hostert: Dissertation: Use of Commercial Simulation Software for Analyzing the Dynamics of an Injection-Molding Clamp Unit. Luxembourg 2006

Josef Bauer: Dissertation: Ermittlung von Schwingfestigskeitseigenschaften für Leichtbaupaneele mit Wabenstruktur. Luxemburg 2008

Stephan Fromknecht: Dissertation: Optimized Anchor Plates in Steel- and Composite Constructions with regard to Construction Management and Load Bearing Capacity. Luxemburg 2009

Markus Waltering: Dissertation: Damage Assessment of Civil Engineering Structures and Bridges using Nonlinear Dynamic Characteristics. Luxemburg 2009

Thomas Thielen: Dissertation: Optimierung der Tragfähigkeit von antibiotikabeladenen PMMA-Hüftinterimsprothesen. Luxemburg 2009

Christoph Hahn: Dissertation: Zur Rotationskapazität von Verbundanschlüssen bei der Bemessung nach dem Fließgelenkverfahren, Luxemburg 2009

Julien Michels: Dissertation: Bearing Capacity of Steel Fiber Reinforced Concrete Flat Slabs. Luxembourg 2009

Nadine Leufgens: Dissertation: Ein Modell zur Ermittlung des Festigkeitsverlustes von Lochsteinen im Vergleich zur Materialfestigkeit. Luxemburg 2010

Edwige Nicolas: Dissertation: Compatibilités et Incompatibilités Liants / Superplastifiants. Luxembourg 2010

Vincent Hanus: Dissertation: Analysis and modelling of the noise generation during vibratory pile driving and determination of the optimization potential. Luxemburg 2010

Volker Bungard : Dissertation: Condition assessment of concrete structures and bridges using vibration monitoring in comparison to changes in their static properties. Luxembourg 2010

Sandro Weisheit: Dissertation: Zu den Einflüssen der klimatischen Umgebungsbedingungen auf die Eigenschaften eines selbstverdichtenden Betons, Luxemburg 2010

David Macieira Rodrigues : Dissertation: Identification of Material Thermal Stress Strain Behaviour for Simulation of Conditions in Reactors, Luxemburg 2011

Laurent Breyer: Dissertation: Dynamic Modelling of Ground Antenna, Luxembourg 2011

Andreas Thewes: Dissertation: Energieeffizienz neuer Schul- und Bürogebäude in Luxemburg basierend auf Verbrauchsdaten und Simulationen, Luxembourg 2011

Ralf Hoben: Dissertation: Design and Implementation of a Reliable Distributed Energy Management System, Luxembourg, September 2011

Katarzyna Golkowska:Dissertation: Anaerobic Mono-Digestion of Maize and Cellulose at different temperatures and operating Modes. Luxembourg December 2011, Dissertation_KGolkowska

Kasra Samiei: Dissertation: Assessment of Implicit and Explicit Algorithms in Numerical Simulation of Granular Matter, Luxembourg February 2012.

Thorsten Hoos: Dissertation: Einsparpotential und ökonomische Analyse der energetischen Sanierung staatlicher Gebäude in Luxemburg. Luxemburg, May 2012

Suresh Kumar Kannan: Dissertation: Numerical Investigation into the Primary Breakup of Liquid Jets and Sheets. Luxembourg August 2012

Simon Pierre Neumann: Dissertation: Conception, fabrication et validation d'un dispositif de mesure non-invasive de la laxité rotatoire du genou "Rotamètre". Luxembourg , Septembre 2012

Lara Aleluia da Silva Reis: Dissertation: Development and Application of an Asymptotic Lavel Transport Pollution Model for Luxembourg Energy Air Quality Project. Luxembourg, January 2013

Hubert Anton Moser: Dissertation: Systems Engineering, Systems Thinking and Learning: A Case Study in Space Industry. Luxembourg, March 2013

Joana Tarres Font: Dissertation: Energy Efficiency in Electric Steelmaking: A detailed Energy Audit of an Entire Steel Plant focusing on Waste Heat recovery. Luxembourg, April 2013

Jean Mahowald: Dissertation: Evaluation of dynamic damage indicators on real-life civil engineering structures: measurement uncertainty and environmental influences considered, Luxembourg, May 2013

Laurent Wahl: Dissertation: Promotionsdisputation: Ermüdungseigenschaften des Wabenkerns von sandwichpaneelen aus Aluminium, Luxembourg, June 2013

Julien Carton: Dissertation: Efficacité énergétique et fonctionnalité de bâtiments existants équipés de façades double peau, Luxembourg, July 2013

Andreas May: Dissertation:Zum Tragverhalten von Verbunddecken mit Holzleichtbeton im Hochbau, Luxembourg, September 2013

Vincent Dias: Dissertation:Development of Adhesive Constitutive Material Laws for the Assessment of Bonded Steel to Glass Composite Beams, Luxembourg, November 2013

Florian Hoffmann: Dissertation:Modeling Heterogeneous Reactions in Packed Beds and its Application to an Upper Shaft of Blast Furnace. Luxembourg, April 2014

Boris Eisenbart: Dissertation: Supporting Interdisciplinary System Development Through Integrated Function Modelling, Luxembourg, June 2014

Mark Michael: Dissertation: A discrete Approach to describe the Kinematics between Snow and a Tire Tread. Luxembourg, June 2014

Lars Juul: Dissertation:Optimisation of terahertz photomixer layout, Luxembourg, July 2014

Stephan Sellen: Dissertation: Untersuchung der Ermüdungsfestigkeit von komplexen innendruckbelasteten Aluminiumgeometrien und der Lebensdauersteigerung durch Autofrettage. Luxembourg, July 2014

Frank Scherbaum: Dissertation: Zustandsbewertung von Brücken unter Berücksichtigung der temperaturabhängigen Steifigkeit des Fahrbahnbelages, Luxembourg, July 2014

Tobias Solchenbach: Dissertation: Laserbasiertes Schweißlöten von artungleichen Aluminium-Kupfer-Verbindungen , Luxembourg, September 2014

Mike Tibolt: Dissertation: Design of point fitted insulating glass units, Luxembourg, January 2015

Alexander Merzkirch: Dissertation: Energieeffizienz, Nutzerkomfort und Kostenanalyse von Lüftungsanlagen in Wohngebäuden: Feldtests von neuen Anlagen und Vorstellung bedarfsgeführter Prototypen. Luxembourg January 2015

Lionel Arend: Dissertation: On dual-polarization signalling techniques in satellite communications. Luxembourg, April 2015

Shahriar Agaajani: Dissertation: Development and investigation of a new dry-stacked wall system. Luxembourg, July 2015

Patricia Benito Martin: Dissertation: Investigation of the Mesophilic Degradation of lignocellulosic substrates for different Operating modes and extreme conditions- Optimisation and Modelling. Luxembourg, July 2015

Christian Kohler: Dissertation: The influence of macro-substrates and conditioning on pharmaceutical removal rates by moving bed biofilm reactors, October 2015

Sebastian Nellinger: Dissertation: On the Behaviour of Shear Stud Connections in Composite Beams with Deep Decking, November, 2015

Amir Houshang Mahmoudi: Dissertation: Prediction of heat-up, drying and gasification of fixed and moving beds by the Discrete Particle Method (DPM), November, 2015

Darius Macijauskas: Dissertation: Improved predictions for geotechnical vibrations. December 2015

Ibrahim Fahad Jasim Ghalyan: Dissertation: Force-guided Robotic Assembly Process: Control and Contact State Recognition, Luxembourg, January 2016

Arnaud Diffo Kaze: Dissertation: Etude biomécanique comparative de cinq différents systèmes de fixations utilisés dans les cas d’ostéotomies tibiales valgisantes: Essais expérimentaux et simulations numériques incluant les forces musculaires, Luxembourg, January 2016

Anusha Moonshiram: Dissertation: Phased Array Antenna with Dielectric Phase Shifters, Luxembourg, January 2016

Alvaro Antonio Estupinan Donoso: Dissertation: A discrete-continuous approach to model processing of hard metals, Luxembourg, February 2016

Robert Pytlik: Dissertation: Soil fatigue due to cyclically loaded foundations. Luxembourg, July 2016

Wolfgang Render: Dissertation:Vergleichende Analyse der Berechnungsverfahren der Gesamtenenergieeffizienz für Bürogebäude in Luxemburg, Deutschland, Belgien, Schweiz und Frankreich. Luxemburg, OKtober 2016.

Andrew Ignatenko: Dissertation: Analysis of the impact of ROS in networks describing neurodegenerative diseases, Luxembourg, December 2016

Anja Degens: Dissertation: Design guidelines for highly glazed office buildings in steel composite construction developed by using dynamic thermal simulations, optimization methods and life cycle assessment, Luxembourg, December 2016

Srivathsan Ravi : Dissertation: Numerical Modelling of Piezoelectric Energy Harvesting Devices Driven by Flow-Induced Vibrations, Luxembourg, January, 2017

David Wendling: Entwicklung eines EDV-basierten Frühwarnsystems für die Blankaalabwanderung an der Mosel, Luxemburg, Januar 2017

Mohammad Mohseni: Drying and Conversion Analysis of Biomass by a DEM-CFD Coupling Approach, Luxembourg, March 2017

Sebastian Hien: Approaches for supportive prediction of biogas production rate and control strategies to provide flexible power production. Luxembourg, May 2017

Anahita. B. Rahimi: Verhalten ausgewählter Nanopartikel in kommunalen Kläranlagen unter besonderer Berücksichtigung der anaeroben Schlammbehandlung, Luxembourg, May 2017

Amalya Khurshudyan: Comparative study of reduced-order methods for geometrically nonlinear structures, Luxembourg, May 2017

Manuel Brühl: Aktive Balancing-Systeme für Lithium-lonen Batterien und deren Auswirkungen auf die Zellalterung, Luxemburg, June 2017

Sebastian Schommer: Damage detection in prestressed concrete bridges based on static load testing, sagging and modal parameters, using measurements and model updating. Luxembourg, July 2017

Gregor Waltersdorfer: Design for meaning in products and services to foster eco-sufficient user behavior: Exemplified by sharing goods, Luxembourg, September 2017

Yves Staudt: A Contribution to the Definition of a Failure Criterion of Adhesively Bonded Connections with Silicone, November 2017

Patrick Kobou Ngani: Active Harmonics Compensation in Smart Grids, November 2017

Michael Weiler: Investigation of crack development in a fair-faced replacement screed based on hybrid fiber-reinforced concrete, December, 2017

Maryam Baniasadi: Resolving Multiphase flow of trickle Bed reactors by the extended Discrete Element Method (XDEM) Applied to the Blast Furnace. Luxembourg, February 2018

Christian Lamberti: Optimierung einer mittels Laserstrahl gefügten Verbindung zwischen Aluminium und Polyamid 6.6 sowie die Untersuchung des Interaktionsmechanismus zwischen beiden Materialien in der Grenzschicht, Luxembourg, January 2018

Job Duarte Da Costa: Structural properties of steel-concrete composite joints, Luxembourg, March 2018

Christoph Schopp: Characterization and Multi-Physical Analysis of Microwave plasma Applications. Luxembourg, April 2018

Kibrom Ebay Abraha: Multi-GNSS Error Characteristics and Benefits to long-term Monitoring Applications in Geo-Sciences. Luxembourg, April 2018

Dario Torregrossa: A decision support system for energy saving in WWTP., Luxembourg, July 2018

Christof Oberhausen: StreaM- Standardisierte unternehmensübergreifende Wertstrommethode. Luxembourg, August 2018

Yu-Chung Liao: Impact of Debris Flow on Buildings and Structures during Flooding, Luxembourg, October 2018

Mehdi Baniasadi: Analysis of Cohesive Zone Behaviour through Advanced Multi-physics Simulation Technology, November 2018

Pascal Schmalen: Post-process and In-process Analysis Methods for Laser Welding of Aluminium-Copper, March 2019

Bogdan Toader: MOBILITY ANALYSIS AND PROFILING FOR SMART MOBILITY SERVICES: A BIG DATA DRIVEN APPROACH, March 2019

Jan Jungbluth: Entwicklung eines intelligenten, roboterunterstützten Assistenzsystems für die Demontage industrieller Produkte, April, 2019

Pierre-Louis Ricci: Numerical Analysis of Gait Load Distributionin the Human Pelvis and Design of a Biomechanical testing Device: Experimental Assessment of two Implants for Anterior Fragility Fractures. Luxembourg, April 2019

Kerstin Cramer: Numerical Modeling of Air-gap Membrane Distillation. Luxembourg, June 2019

Maciej Piotr Chrzanowski: Shear Transfer in Heavy Steel-Concrete Composite Columns with Multiple Encased Steel Profiles, Luxembourg, June 2019

Nadine Kaczmrkiewicz: Numerische Untersuchung zur Strömungsentwicklung im passiven Flutsystem des Reaktordesigns KERENA, Luxembourg, July 2019

Sophie Klecker: Robotic Trajectory Tracking: Position- and Force-Control, Luxembourg, July 2019

Shilton Rica: Improved design models for the bearing capacity of foundation piles. Luxembourg, September 2019

Johannes Rullof: Entwicklung und Modellierung eines Hybrid-Solarmodulkollektor-basierten Wärmepumpensystems auf der Basis von CO2 Direktverdampfung in Mikrokanälen, September 2019

Maxime Turetta: Development of an innovative U-shaped steel-concrete composite beam solution: Experimental and numerical studies on the mechanichal behavior, October, 2019

Thanh Binh Cao: Optimisation Assisted Designing Mechanical Elements for Direct Metal Laser, November, 2019

Anne Christen: The impact of macro-substrate on micropollutant degradation in activated sludge systems.  Luxembourg, November 2019

Christoph Wilhelm Schmidt : Feldtest und dynamische Simulation der außenliegenden Wandtemperierung- Auswertung der Ergebnisse eines Feldtests und dynamische Simulationsstudien eines außenliegenden Wand-und Lufttemperatursystems. Luxembourg, November 2019

Gelen Gael Chewe Ngapea:  Improvement of the load-beaming capacity of dry-stacked masonry, Luxembourg, December 2019

Michel Haag: Experimentelle Untersuchuingen und analytische Modellierung von adiabaten Siedevorgängen in Naturumlaufsystemen. Luxembourg, 10. Januar 2020

Marc Schiry: Untersuchung der metallurgischen Phasenbildung und deren Einfluss auf die Verbindungseigenschaften sowie auf die Versagensursachen von laserstrahlgeschweißten Hartmetall-Stahl-Verbunden, February 2020

András Kozma: Demountable composite beams: Analytical calculation approaches for shear connections with multilinear load-slip behaviour. June 2020

Sasan Raffi Tabrizi: Smart electrical and thermal energy supply for nearly Zero Energy Buildings, Luxembourg, August 2020

Qingjie Zhang: Moment and longitudinal resistance for Composite beams based on strain limited design. Luxembourg, September 2020

Steffen Bechtel: Demand-side Management mit Wärmepumpen in Luxemburg - Potenziale und Herausforderungen der Wärmepumpenflexibilität für die Systemintegration der erneuerbaren Energien.  Luxembourg, Dezember 2020

Valentino Vigneri: LOAD BEARING MECHANISMS OF HEADED STUD SHEAR CONNECTIONS IN PROFILED STEEL SHEETING TRANSVERSE TO THE BEAM, Luxembourg, January 2021

Dietmar Backes: Integration of Digital Elevation Models from Multiple Sources to Optimise Flood Modelling Applications, Luxembourg July2021

Yamila Omar: Complex Network Metrics in Manufacturing-Suitability and Interpretation, Luxembourg July 8th 2021

Adham Al Sayyad: Laser Welding of Metals to Polymers under the special influence of surface pretreatment on interfacial thermal transfer, Luxembourg 14 th July 2021

Christian Repplinger: Fatigue life opzimization of a high-pressure loaded Aluminium Valve body and leakage investigation for elastomeric seals at low temperature. Luxembourg September 2021

Tanja Kebig: Reference measurements and simulations of static and dynamic characteristics of prestressed concrete bridges under outdoor conditions for Structural Health Monitoring. Luxembourg September 2021